Why Shop With

DJI Matrice 600 Hexacoptor with ZENMUSE Z15 Panasonic GH4 Gimbal

Availability: Please contact us for lead times & to order

  • Please note: Contact us for lead times and to order this product.

  • Designed for filmmakers and industrial applications

  • For Panasonic GH4/GH3 Cameras

  • Provides 360° Camera Rotation

  • Provides +50° / -140° Tilt

  • Provides up to ±40° Roll

  • Supports HD Transmission via Lightbridge

  • Integrated IMU Module

  • Remote Shutter Release Operation

  • Three Selectable Control Modes

  • Requires Olympus 12mm f/2.0 Lens

  • For Octo-Rotors Such as S1000 and S900

  • A3 and Lightbridge 2 built-in

  • Upgradeable with A3 PRO and D-RTK GNSS

  • Extended flight time and long range transmission

Availability: Please contact us for lead times & to order


Availability: Availability: Please contact us for lead times & to order

Bread Checkout

Paypal Credit Banner



The Zenmuse Z15-GH4 HD 3-Axis Gimbal for Panasonic GH3/GH4 from DJIperforms two key functions: keeping the camera level and providing stabilization, thus helping you transform a larger multi-rotor UAV, such as the S1000, into a platform for professional aerial video and aerial photography. Featuring ±0.01° control angle accuracy, the Z15-GH4 features three operation modes; two optimized for aerial video and photo use and one for FPV (first person view) applications. The gimbal is operated using a dedicated stick on the transmitter (hand-held radio controller), and the receiver must have at least four free channels that can be assigned to gimbal operation. Alternatively, a second transmitter can be use by a dedicated camera/gimbal operator.

The gimbal can be used with either the Panasonic GH3 or GH4 camera when paired with the Olympus M.ZUIKO DIGITAL ED 12mm f/2.0 lens. It is very important to only use the gimbal with this lens, as other lenses may throw off the balance causing poor performance and potentially damaging the servo motors. On-camera accessories - such as external microphones - should not attached either.

Note: Installation may require soldering. Please see the user manual for your aircraft for installation requirements.

Compatible Aircraft
The Z15-GH4 requires a larger multi-rotor UAV aircraft, such as the S1000, S1000+, or S800 EVO, that has installed either the A2 or WooKong-M flight control system. Depending on the UAV model the Z15 Gimbal is installed in, additional, separately available, electronics and mounting hardware may be required. Apart from the flight control system, the receiver must have at least four open channels, and the transmitter must be programmable to support gimbal operation

3-Axes of Stabilization and Control
For maximum maneuverability, all the wires for power and video signal pass through the tubes of the Gimbal, allowing each axis to rotate without limitation. The Yaw (pan) can achieve full ±360° rotation while the Pitch can tilt the camera +50° / -140°, and the Roll control can cant the camera ±40° - the latter helping keep the horizon level. Additionally, the gimbal features a precision control of ±0.01° making very precise camera movements possible

Supports HD Video Downlink with Lightbridge
When using the Lightbridge system (available separately) is is possible to relay a live HD image to an HDMI monitor or mobile device at the ground end. For analog systems - like the AVL58 - regular composite AV output is also supported

Two-Person Operation Supported
Four spare receiver channels are required on the transmitter to control the gimbal. Alternatively, a second transmitter can be used exclusively for operating the gimbal. This two-operator setup is ideal for video shoots, as the pilot can concentrate on flying while the camera operator can concentrate on framing the shot

Multiple Control Modes
Orientation-locked Control Mode: Keeps the gimbal locked with the aircraft nose direction

Non-Orientation-locked Control Mode: Gimbal point stays the same regardless of which way the nose is pointing

Back to Mid-point Mode (FPV Mode): Centrally locks the gimbal in the direction of the nose. In this mode the leveling and stabilizing functionality of the gimbal is negated

Built-in Independent IMU Module
Integration of the IMU Module helps reduce the amount of wiring required for installation. Plus, the gimbal provides a specially designed and customized video output module

Gimbal Servo Drive Module
Following in the tradition of previous Zenmuse gimbals, the Z15 features high precision control characteristics demanded by professional users. With high precision, low vibration, and high torque characteristics, this module helps provides additional camera stabilization

Windows Assistant Software
Firmware updates, diagnostic testing, and other critical maintenance will require the use of the computer-based Assistant Software. This software requires Windows 8, 7, XP SP3 in 32- or 64-bit versions

If you are using the DJI Lightbridge system you can stream an HD live view image to your mobile device or monitor at the ground end. Plus there us an analog (AV) video output for 5.8 GHz video transmitters like the AVL58

Shuttle Release Control
When using the Lightbrigde system it is possible to remotely trigger the camera's shutter release to take a still photo in flight



Diagonal Wheelbase1133 mm
Aircraft Dimensions
  • 1668 mm x 1518 mm x 759 mm (Propellers, frame arms and GPS mount unfolded)
  • 640 mm x 582 mm x 623 mm (Frame arms and GPS mount folded)
Package Dimensions620 mm x 320 mm x 505 mm
Intelligent Flight Battery Quantity6
Weight (with six TB47S batteries)9.1 kg
Weight (with six TB48S batteries)9.6 kg
Max Takeoff Weight15.1 kg


Motor ModelDJI 6010
Propeller ModelDJI 2170



Supported DJI GimbalsZenmuse X3; Zenmuse X5 series; Zenmuse XT; Ronin-MX; Zenmuse Z15 series HD gimbals: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Retractable Landing GearStandard
Operating Temperature14° to 104° F (-10° to 40° C)



Voltage Output26.3 V
Power Rating100 W



Capacity5700 mAh
Voltage22.8 V
TypeLiPo 6S
Energy129.96 Wh
Net Weight680 g
Operating Temperature14° to 104° F (-10° to 40° C)
Storage Temperature
  • Less than 3 months: -4° to 113° F (-20° to 45° C)
  • More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature 41° to 104° F (5° to 40° C)
Max Charging Power180 W



Hovering Accuracy (P-Mode, with GPS)Vertical: ±0.5 m, Horizontal: ±1.5 m
Max Angular VelocityPitch: 300°/s, Yaw: 150°/s
Max Pitch Angle25°
Max Speed of Ascent5 m/s
Max Speed of Descent3 m/s
Max Wind Resistance8 m/s
Max Flight Altitude above Sea Level2500 m
Max Speed18 m/s (No wind)
Hovering Time (with six TB47S batteries)*No payload: 35 min, 6 kg payload: 16 min
Hovering Time (with six TB48S batteries)*No payload: 40 min, 5.5 kg payload: 18 min
* The hovering time is based on flying at 10 m above sea level in a no-wind environment and landing with 10% battery level.






Operating Frequency
  • 920.6 MHz to 928 MHz (Japan)
  • 5.725 GHz to 5.825 GHz
  • 2.400 GHz to 2.483 GHz
Max Transmission Distance (unobstructed, free of interference)
  • FCC Compliant: 3.1 miles (5 km)
  • CE Compliant: 2.1 miles (3.5 km)
  • 10 dBm @ 900 M/li>
  • 13 dBm @ 5.8 G
  • 20 dBm @ 2.4 G
Video Output PortHDMI, SDI, USB
Dual Users CapabilityMaster-and-Slave control
Mobile Device HolderSupports smartphones and tablets
Output Power9 W
Operating Temperature14° to 104° F (-10° to 40° C)
Storage Temperature
  • Less than 3 months: -4° to 113° F (-20° to 45° C)
  • More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature32° to 104° F (0° to 40° C)
Built-in Battery6000 mAh, 2S LiPo
Max Tablet Width170 mm



Capacity4500 mAh
Voltage22.2 V
TypeLiPo 6S
Energy99.9 Wh
Net Weight595 g
Operating Temperature14° to 104° F (-10° to 40° C)
Storage Temperature
  • Less than 3 months: -4° to 113° F (-20° to 45° C)
  • More than 3 months: 72° to 82° F (22° to 28° C)
Charge Temperature41° to 104° F (5° to 40° C)
Max Charging Power180 W


What’s Included

dji matrice 600 pro whats included

dji matrice 600 pro whats included

dji matrice 600 pro whats included


Write Your Own Review

You're reviewing: DJI Matrice 600 Hexacoptor with ZENMUSE Z15 Panasonic GH4 Gimbal

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars


Q & A

Product Questions

No questions yet. Be the first to ask the question!



1.What are the new features of the Matrice 600 when compared to the S1000+?

The S1000+ is merely an aerial platform and has no integrated electronic devices on board. The M600 is a fully integrated aerial platform designed for professional film making and industrial application. The on-board A3 flight controller ensures reliable flight performance while the E2000 Pro propulsion system effectively increases payload. Also, multiple expansion ports guarantee maximized compatibility with add-on devices. The M600 also integrates the Lightbridge 2 transmission system, bringing live HD view and the ability to communicate directly gimbals such as the Ronin-MX.


2.What is the maximum payload of the M600?

When 6 TB47S batteries are installed, the maximum payload is 6kg. When 6 TB48S batteries are installed, the maximum payload is 5.5kg.


3.What is the maximum flight time of the M600?

With TB47S batteries, the M600 can fly for 35 minutes with no extra payload or 16 minutes with 6kg of payload. With TB48S batteries, the M600 can fly for 40 minutes with no extra payload or 18 minutes with 5.5kg of payload.


4.How can I retract the landing gear on the M600? Is the M600 able to retract the landing gear automatically?

You can control the position of the landing gear when the M600 is in the air with a flick of the switch on your remote controller. There is also a toggle in the DJI GO app that enables the M600 to intelligently retract its landing gear when it’s 1.2m above the take-off point. However, the landing gear will not lower itself. To land, you will need to manually toggle the landing gear using the switch.



1.Can I use other flight controllers than the A3 with the M600?

The M600 comes with the A3 flight controller seamlessly integrated and there is no need to install other flight controllers.


2.Does the M600 come with the A3 or the A3 Pro flight controller as standard?

The standard flight controller is the A3. However, you may upgrade to the A3 Pro by adding two additional A3 GNSS and IMU modules. You can also upgrade to D-RTK for greater positioning accuracy.


3.Can the A3 flight controller be used on other aerial platforms?

The A3 flight controller on M600 has been customized specifically for the M600 and can only be used with the M600. Please do not remove the A3 from M600 and do not install it on other platforms.


4.Will the flight performance and accuracy be increase if I upgrade to A3 Pro?

The A3 Pro enhances the reliability and stability of M600 by providing redundancy when any of the GNSS or IMU modules is interfered with or otherwise fails. However, only one set of GNSS and IMU modules can be in effect at any time during the flight, so flight accuracy remains the same as with the A3.



1.Can I link third party remote controllers to the Lightbridge 2 on the M600?

The M600 is a fully integrated aerial platform designed for professional filmmaking and industrial applications. The built-in Lightbridge 2 system is only compatible with DJI remote controllers. Please do not use third party remote controllers with the M600.


2.Does the M600 support dual video input?

Yes. The integrated Lightbridge 2 supports dual video input.


3.Can the M600 be connected to multiple remote controllers? How many slave controllers can be connected at one time?

The Lightbridge 2 on the M600 supports up to one Master and three Slave devices at the same time.



1.What propulsion system does the M600 use? Can I use the E2000 Standard instead?

The M600 has a customized E2000 propulsion system built-in and does not support the E2000 Standard.


2.How do I best prevent propellers from coming loose on the M600?

Screw position indicators on the propellers and adapters enable you to see if a screw has come loose. Check that the marks align before each flight to ensure safety.


3.Can the M600 be connected to multiple remote controllers? How many slave controllers can be connected at one time?

The motors on Matrice 600 and Agras MG-1 share the same performance specification but have a different exterior design so they are not interchangeable.



1.Can I use a mix of TB47S and TB48S batteries with the M600?

No, all six batteries installed on the M600 must be of the same model.


2.What are the differences between the TB47D (for the M100) and the TB47S (for the M600)? Can I use TB47D or TB48D batteries with the M600?

Though the battery capacity and structural design of the TB47D (TB48D) are identical to that of the TB47S (TB48S), the program setting of the ‘D’ series and the ‘S’ series differ. The M600 can only be set up with DJI TB47S/TB48S Intelligent Flight Batteries.


3.Can I charge the TB47S/TB48S batteries with the Inspire 1 Charging Hub?

Yes, the Charging Hubs for the M600 and Inspire 1 are compatible with all TB47/TB48 batteries.


4.Do I need to turn on each battery individually in order to turn on the aircraft?

To turn on the aircraft, you only need to turn on one of the six batteries installed on the M600. The other batteries will turn on and synchronize their boot-up sequence. However, if the voltage discrepancy across the batteries exceeds 1.5v, the boot-up sequence will not be synchronized and you will receive an error message in the APP and through the Battery Management System.


5.Is it true that the aircraft will only take off when all six batteries are installed?

Yes, and we strongly recommend you to fully charge all batteries before flight.


6.How does the battery redundancy system on the M600 work?

In the case that one of the six batteries fails during flight, the M600 will re-calculate the remaining battery capacity, then hover in its current position or begin auto-landing. When the M600 hovers, you can manually land the M600 and then examine the batteries.



1.Which gimbals are supported by the M600?

The M600 supports the Zenmuse Z15 series, Zenmuse X3, Zenmuse X5, Zenmuse X5R, Zenmuse XT and the Ronin-MX.


2.Does the M600 support DJI’s SDKs?

The M600 is compatible with the Mobile SDK and the Onboard SDK. M600 also supports hardware Expansion.


3.How do I update the firmware on the M600?

For the M600 aircraft, use the DJI Assistant 2 software to update the firmware. For the remote controller, you can only update the firmware through the DJI GO app.



1.What can I do when the aircraft is unable to take off and the flight controller LED signals red?

Connect the M600 to the DJI GO app and see the status bar at the top of the display for error messages notifying you of the problem.


2.The Battery Management Board gives an error message when I turn on the M600. How do I resolve this problem?

First of all, ensure that all batteries are firmly installed, especially the batteries that are not turned on. If all batteries are firmly installed, please check the remaining capacity of all batteries. If the ones that cannot be turned on are low on charge, please recharge the batteries to full.


3.What is the cause of the problem when the six batteries cannot be turned on simultaneously, making the aircraft unable to take off?

If the voltage discrepancy across the six batteries exceeds 1.5v, the aircraft will not take-off to ensure maximum flight safety. Please charge all six batteries before your flight.


4.How can I tell if any module in the redundant system has malfunctioned?

The GNSS and IMU modules have built-in LED status indicators. If the indicators are green or blue, the respective module is functioning properly. If the indicator signals red, the module has malfunctioned. Please connect your aircraft to the DJI GO app or Assistant software for further information.